1.Introduction
This is the manual for the integration between Bol.com and Lundify.
This integration ensures that orders from the Bol.com webshop are automatically processed to invoices in Lundify. Because the orders enter the webshop owner's accounting system directly, it saves time on financial administration.
Please pay special attention to the following
- This integration is a financial integration. It is not a logistics integration. It is not suitable for updating customers in Lundify, printing packing slips, or synchronizing products/inventory.
- This integration does not replace the work of an accountant. It saves time because you no longer have to retype documents. The accountant is still needed for advice, expertise, and control.
- Please note: Bjorn Lunden Lundify does not support OSS. This integration is therefore not suitable for OSS. If your webshop falls under OSS regulations, the advice is not to use this integration, or only for non-OSS sales.
- The integration uses the default VAT percentage as configured in the Configuration tab of the dashboard. The integration is therefore not suitable for selling both 21% and 9% on Bol.com.
Tip: Other customers using this integration found the tips in the FAQ for Bol.com and in the FAQ for Lundify.
Install integration
Installing the integration starts with signing up for a trial period, via our integrations page. After registration, you will receive an email containing an installation URL and login details. With this installation URL, you start the installation of the integration.
The installation is complete when both connection dots are green, and the settings in the Configuration tab have been entered and saved.
There is a trial period of 30 days.
If you want to install another integration, you can do so in the same way. Make sure you are logged out of the integration dashboard and preferably start the new installation in an incognito browser.
Installing the integration starts with signing up for a trial period, via our integrations page. After registration, you will receive an email containing an installation URL and login details. With this installation URL, you start the installation of the integration.
The installation is complete when both connection dots are green, and the settings in the Configuration tab have been entered and saved.
There is a trial period of 30 days.
If you want to install another integration, you can do so in the same way. Make sure you are logged out of the integration dashboard and preferably start the new installation in an incognito browser.
Cancel integration
At the end of the trial or subscription period, the integration will not be automatically renewed. You will receive an offer for a one-year subscription or renewal by email at the end of this period. You can confirm the renewal by using the payment link in that email. Do you want to terminate the integration in the meantime? This is possible via the dashboard https://uwkoppeling.webwinkelfacturen.nl, Configuration tab > Cancel integration. The integration will then be cancelled immediately. Please note: After cancellation, the dashboard is no longer accessible.
Are you switching to another web shop/accounting system and do you want to re-establish a connection? In this faq we explain how to do this.
We advise you to revoke the consumer ID and secret within your Bol.com environment upon uninstallation of the integration.
At the end of the trial or subscription period, the integration will not be automatically renewed. You will receive an offer for a one-year subscription or renewal by email at the end of this period. You can confirm the renewal by using the payment link in that email. Do you want to terminate the integration in the meantime? This is possible via the dashboard https://uwkoppeling.webwinkelfacturen.nl, Configuration tab > Cancel integration. The integration will then be cancelled immediately. Please note: After cancellation, the dashboard is no longer accessible.
Are you switching to another web shop/accounting system and do you want to re-establish a connection? In this faq we explain how to do this.
We advise you to revoke the consumer ID and secret within your Bol.com environment upon uninstallation of the integration.
2.How the integration works
A order from the Bol.com webshop is processed to a Lundify invoice.
New orders from your webshop are retrieved at least once per hour. Orders are retrieved from the shipping list at Bol.com, not from the Open orders list. An order is only processed once all products in that order have been shipped. Outstanding orders are updated during the night.
Returns are not processed automatically. If you want to process returns, send us an email .
Read more How the integration works .... Read less How the integration works ....
New orders from your webshop are retrieved at least once per hour. Orders are retrieved from the shipping list at Bol.com, not from the Open orders list. An order is only processed once all products in that order have been shipped. Outstanding orders are updated during the night.
Returns are not processed automatically. If you want to process returns, send us an email .
Read more How the integration works .... Read less How the integration works ....
Pre-check orders
At the start of processing an order, we perform a number of checks on the Bol.com order:
At the start of processing an order, we perform a number of checks on the Bol.com order:
- It is checked whether the total of the Bol.com order is equal to the sum of the amounts in the order lines plus the shipping cost amount.
- It is checked whether the order has not already been processed.
Processing orders
Processing a Bol.com order to Lundify takes place in three steps:
Processing a Bol.com order to Lundify takes place in three steps:
- It is checked if the customer already exists in Lundify. If not, the customer is created. Matching is based on the email address.
- When processing to Lundify orders, it is checked whether the products from the Bol.com order are already present in Lundify. Missing products are created.
- The Lundify invoice is created and added.
Post-check
After the order has been forwarded and a success message from Lundify has been received, the order is marked as handled. The Bol.com order appears at the Reporting tab on the dashboard.
If Lundify returns an error while processing the order, the order appears in the Errors tab on the dashboard. Via the yellow button More info more information about the problem can be found. Via the red button Report problem can the order with all necessary information easily be submitted to us after you have tried to resolve the problem yourself. If the problem is solved, in some cases the orders can be processed again with the blue Process button.
Data
Information about the data that is processed can be found in the section Day-to-day: To Lundify later in the manual.
After the order has been forwarded and a success message from Lundify has been received, the order is marked as handled. The Bol.com order appears at the Reporting tab on the dashboard.
If Lundify returns an error while processing the order, the order appears in the Errors tab on the dashboard. Via the yellow button More info more information about the problem can be found. Via the red button Report problem can the order with all necessary information easily be submitted to us after you have tried to resolve the problem yourself. If the problem is solved, in some cases the orders can be processed again with the blue Process button.
Data
Information about the data that is processed can be found in the section Day-to-day: To Lundify later in the manual.
3.Required: Bol.com keys
You create the integration with your Bol.com platform using two keys: a client ID and a secret. You can create these keys within your Bol.com account.
Bol.com itself has a description with pictures on how to create the keys: https://api.bol.com/retailer/public/Retailer-API/credentials_for_retailer_api.html
4.Required: Lundify connection
A public key is required to connect to Lundify. You can find this key in your Lundify dashboard. Log in and go to Integrations. If you click on the right gear icon (2), a popup will appear. Activate the integration (3) and copy the key (the string in the box).
Then you log in on the dashboard https://uwkoppeling.webwinkelfacturen.nl. Enter the key in the Configuration, Authentication, or All Settings tab. This establishes the connection with Lundify.
5.Installation
After installation, check using this FAQ, whether the integration works.
Installing the integration starts with signing up for a trial period, via our integrations page. After registration, you will receive an email containing an installation URL and login details. With this installation URL, you start the installation of the integration.
Read more Installation .... Read less Installation ....
Read more Installation .... Read less Installation ....
Before the integration can be used, the terms and conditions must first be accepted. The terms and conditions are based on the general ICT Terms and Conditions (industry organization) and the general GDPR guidelines. 
Bol.com authentication:
Authentication with your Bol.com account is done via the Client id and Client secret that you determined in a previous section. Click the red Connect button next to Bol.com and enter the Client id and Client secret in the popup window.
Authentication with your Bol.com account is done via the Client id and Client secret that you determined in a previous section. Click the red Connect button next to Bol.com and enter the Client id and Client secret in the popup window.
Authentication Lundify
Establishing the connection with Lundify is done via the red Connect button in the Configuration tab. In the pop-up, you enter your Customer Code (this is the Lundify online 5-digit member number), and the token you created in the previous section. Please note, you need the entire code as a token, including the 1-part.
Settings Lundify
To use Lundify, select an administration within your account. You also indicate in which journal the revenue should be posted and what the debtors account is. The journal for processing (individual) orders will be a Sales journal.
To use Lundify, select an administration within your account. You also indicate in which journal the revenue should be posted and what the debtors account is. The journal for processing (individual) orders will be a Sales journal.
Configure VAT rates and general ledger accounts
When configuring the VAT rates and general ledger accounts, a link is created between the VAT rates in webshop and the VAT codes and revenue accounts in Lundify. You can always make changes by clicking the blue 'Edit' button and selecting an option from the drop-down menus.
Bol.com does not provide VAT percentages on your orders. Therefore, you can enter a default VAT percentage for NL, BE, and Other for the integration.
Intra-Community (ICP) and international deliveries
The Intra-Community supplies / ICP option is intended for business-to-business deliveries within the EU. These sales are invoiced with 0% VAT. A VAT number from the customer is required. The International option applies to deliveries outside the EU. For these sales, the integration expects 0% VAT; otherwise, the sales cannot be processed. Separate VAT codes and general ledger accounts can be configured for both ICP and international deliveries.
Once the VAT settings have been configured and saved, you will always see the selected VAT rates. If you want to start over, you can use the grey 'Remove VAT settings' button. Your current settings will then be deleted and you can begin again.
When configuring the VAT rates and general ledger accounts, a link is created between the VAT rates in webshop and the VAT codes and revenue accounts in Lundify. You can always make changes by clicking the blue 'Edit' button and selecting an option from the drop-down menus.
Bol.com does not provide VAT percentages on your orders. Therefore, you can enter a default VAT percentage for NL, BE, and Other for the integration.
Intra-Community (ICP) and international deliveries
The Intra-Community supplies / ICP option is intended for business-to-business deliveries within the EU. These sales are invoiced with 0% VAT. A VAT number from the customer is required. The International option applies to deliveries outside the EU. For these sales, the integration expects 0% VAT; otherwise, the sales cannot be processed. Separate VAT codes and general ledger accounts can be configured for both ICP and international deliveries.
Once the VAT settings have been configured and saved, you will always see the selected VAT rates. If you want to start over, you can use the grey 'Remove VAT settings' button. Your current settings will then be deleted and you can begin again.
Configure payment methods
You can create a link here between the payment methods in the webshop and a fixed debtor in your Lundify administration. Orders with a payment method from the list will then always be posted to this debtor. In that case, no new debtors will be created.
You can create a link here between the payment methods in the webshop and a fixed debtor in your Lundify administration. Orders with a payment method from the list will then always be posted to this debtor. In that case, no new debtors will be created.
6.Day-to-day: From Bol.com
This section explains how the integration retrieves orders from the Bol.com account.
Processing schedule: The integration retrieves orders every hour from the Bol.com shipping list. This means that if orders are still in the open order list of Bol.com (or partially), the orders are not yet processed. The integration can go back up to 3 months in time to retrieve orders. After three months, the orders disappear from the shipping list and the integration can no longer retrieve them.
Once an order has been processed, it cannot be processed again. An order that is modified in Bol after it has been processed will not be adjusted in Lundify.
The Netherlands and Belgium For some businesses it is important to split Bol.com orders between the Netherlands and Belgium due to VAT returns and threshold amounts. It is possible to post the orders to country-specific general ledger accounts. More information in the FAQ.
Once an order has been processed, it cannot be processed again. An order that is modified in Bol after it has been processed will not be adjusted in Lundify.
The Netherlands and Belgium For some businesses it is important to split Bol.com orders between the Netherlands and Belgium due to VAT returns and threshold amounts. It is possible to post the orders to country-specific general ledger accounts. More information in the FAQ.
Returns
If you want the integration to process returns in addition to orders, please contact us. We will then enable the returns option. To process returns, the integration retrieves the order for which the return was created. This order is used to determine the return.
Please note: The integration only processes a return if the integration has previously processed the order to which the return relates. For more information see the FAQ.
If you want the integration to process returns in addition to orders, please contact us. We will then enable the returns option. To process returns, the integration retrieves the order for which the return was created. This order is used to determine the return.
Please note: The integration only processes a return if the integration has previously processed the order to which the return relates. For more information see the FAQ.
Field-level specification orders
Specification Bol.com order. +-
| Name field | Values from Bol.com order |
| Order-identifier | [orderId] |
| Order number | [orderId] on request we can set a prefix here |
| Order and booking date | The date from [orderPlacedDateTime] |
| Total incl | Sum of amounts incl. VAT in the order lines |
| Total excl | Sum of amounts excl. VAT in the order lines |
Specification Bol.com order lines. +-
| Name field | Values from Bol.com order |
| VAT percentage | dummy value that is determined later based on the default VAT percentage in the settings or - if applicable - the product in Lundify |
| Name product | [product][title] |
| SKU | This is not filled in. Some merchants would like to have the field [offerReference] filled in here. This is not possible because not all Bol.com merchants use the field [offerReference] for the product SKU. |
| Barcode | [product][ean] |
| Amount | [quantity] |
| Unit price excl. VAT | Is not filled in because this amount is not yet known |
| Unit price incl. VAT | [unitPrice] |
| Line price incl. VAT | [unitPrice] * [quantity] |
| Accounts and VAT codes from Lundify | Dummy values, these are only determined when creating the invoice in Lundify. |
Specification Bol.com customer. +-
| Name field | Values from Bol.com order |
| If only the shipping address is in the order, the billing address becomes the same as the shipping address | |
| First name | [billingDetails][firstName] |
| Last name | [billingDetails][lastName] |
| Company | [billingDetails][company] |
| Chamber of Commerce number | [billingDetails][kvkNumber] |
| Address line 1 | [billingDetails][streetName] |
| Address line 2 | [billingDetails][extraAddressInformation] |
| House number | [billingDetails][houseNumber] [billingDetails][houseNumberExtension] |
| Zip code | [billingDetails][zipCode] |
| City | [billingDetails][city] |
| Country | [billingdetails][countryCode] |
| Shipping address | Same as for the billing address, but now with [shipmentDetails] instead of [billingDetails] |
| VAT number | [billingDetails][vatNumber] |
| Emailaddress | [billingDetails][email] |
Specification Bol.com return. +-
| Name field | Values from Bol.com return |
| The return lines are not stored separately in Bol.com. Therefore, both the return and the associated order are used to read the return. | |
| Order ID | Identifier from the order |
| Order number | Number from the order |
| Return ID | [returnId] |
| Return date | [registrationDateTime] if present, otherwise the order date |
| Customer data | The customer data from the order |
| Return lines |
The return line is determined based on the line itself and the associated order line
|
7.Day-to-day: To Lundify
This data is processed to Lundify:
Creating invoices
The orders from Bol.com are imported into Lundify as an invoice. This invoice is also immediately posted as a journal entry. For each order, the VAT and general ledger account are provided as configured during the installation of the integration.
When creating invoices, new debtors may be added to Lundify. By default, no products are added to Lundify, and the text line from the Bol.com order appears in the Lundify invoice. It is possible to provide a product code. If you want this, please contact webcare@webwinkelfacturen.nl.
Cost center
It is possible to provide one default cost center to the Lundify invoice. One default cost center is possible per integration. Please contact webcare@webwinkelfacturen.nl stating the license key to make use of this.
Create debtors
When processing customer information, it is first checked whether the customer has been processed before. If so, this Lundify debtor is used as the debtor for the Lundify invoice. If the customer is not yet known, they are added to Lundify. Matching is based on email address. Please note: The integration only creates debtors. The integration does not modify debtors.
When processing customer information, it is first checked whether the customer has been processed before. If so, this Lundify debtor is used as the debtor for the Lundify invoice. If the customer is not yet known, they are added to Lundify. Matching is based on email address. Please note: The integration only creates debtors. The integration does not modify debtors.
Create products
When processing to Lundify invoices incl. products, products that are not yet in Lundify will be added. See here for an explanation of how product codes are determined FAQ. The product is assigned the VAT code based on the VAT percentage in the order line and the general ledger account configured in the Configuration tab of the dashboard.
Please note: The integration only creates products. The integration does not modify products.
When processing to Lundify invoices incl. products, products that are not yet in Lundify will be added. See here for an explanation of how product codes are determined FAQ. The product is assigned the VAT code based on the VAT percentage in the order line and the general ledger account configured in the Configuration tab of the dashboard.
Please note: The integration only creates products. The integration does not modify products.
Automatically sending invoices
It is not possible to automatically send the created invoice in Lundify to the customer.
It is not possible to automatically send the created invoice in Lundify to the customer.
Field-level specification Lundify
Field-level specification Lundify customer invoice.+-
| Name | Example | Note |
| Customer ID | 1011 | Debtor identifier in Lundify |
| Invoice date | 2025-06-01 | Sales date Bol.com order |
| Expiration date | 2025-06-15 | Standard 14 days, not adjustable |
| Comment | Please leave on the doorstep | Comment Bol.com order |
| Name | Sarah de Zwart | Debtor name according to Bol.com order |
| info@sponiza.nl | ||
| Address | Stationstraat 12 | |
| Postal code | 1234 AB | |
| City | Amsterdam | |
| Country | NL | |
| Recipient name | Mies Talenberg | |
| Shipping address | Dorpsstraat 152 | |
| Postcode - Shipping address | 2345 AB | |
| City - Shipping address | Heerlen | |
| Country - Shipping address | NL | |
| Invoice lines | ||
| Revenue account | 8000 | |
| Product-identifier | prod123 | Only if processing to products is enabled. |
| Amount | 3 | |
| Unit price excl. VAT | 1.50 | Please note: This is the unit price excl. VAT. |
| Line price incl. VAT | 4.91 | |
| VAT code | 2 | |
| Text | Birthday cake | |
Field-level specification of the Lundify customer. +-
| Name | Example | Note |
| name | Confectioner | Empty if there is no company name |
| street | Stationsweg 12 | Address |
| country | SE / NL | Invoice address country |
| email address | info@sponiza.nl | |
| phone no | 0623138822 | |
| Address details | ||
| entityid | 123 | Identifier Lundify debtor |
| Invoice address details | ||
Field-level specification of the Lundify product. +-
| Name | Example | Note |
| entityId | prod123 | Identifier product |
| account | 8000 | Revenue account |
| name | Birthday cake | Product name |
| descriptionUK | Birthday cake with whipped cream and orange | Product description |
| Vatcode | 2 | VAT code |
| VAT account | 1500 | VAT account |
| costCenter | 001 | Default cost center |
| Because the prices from Bol.com are used, and a product is added once and not modified thereafter, no prices are provided with the product. | ||
8.Support
Explanation tabs dashboard
On the Dashboard >> Report you can see which orders from your Bol.com webshop, and when, have been transferred to Lundify.At Dashboard >> Errors you can see which orders have not been processed. Via the blue Process button you can (re)submit the order. Via the red Report problem button you can create a ticket with us.
At Dashboard >> Open the orders are listed that have not yet been processed because they do not yet have the correct status in the webshop. Every night jobs run to review the status again and still process the order.
At Dashboard >> Configuration you will find the settings of your integration. You can adjust settings there.
At Dashboard >> Profile invoices are available for download. You can also specify an additional email address here for sending emails and stop the integration.
What if orders are missing in Lundify
If orders are missing in Lundify we recommend following the steps below:- Log in to the dashboard: https://uwkoppeling.webwinkelfacturen.nl. The username and password are included in the registration email.
- Go to the Errors tab and check if order is there. You may need to adjust the search period if the
order is from a previous month. If you find order in this overview:
- Check the error code and verify whether you can resolve it yourself.
- If yes resolve the issue and click the blue Process button to resubmit the order.
- If not use the red Report problem button to create a ticket with us.
- Note if there are multiple errors, please create only 1 or 2 tickets. We will automatically see the other issues.
- Go to the Report tab and see if order is listed there. If so, you'll often see an identifier for Lundify (in the purple section of the overview) that you can use to search for order.
- Go to the Open tab and check if order is there.
- If you cannot resolve the issue, you can always create a ticket via the green Ask us button.
We have an extensive FAQ-section on the website. Pay particular attention to these sections: https://faq.webwinkelfacturen.nl/category/4/bolcom.html and https://faq.webwinkelfacturen.nl/category/83/lundify.html.
Would you prefer that we perform the installation of the integration for you? That is possible. Send an email to webcare@webwinkelfacturen.nl with the request. For an installation, we charge € 39.50 excl. VAT. For installations, we require access to the webshop and the accounting system.
We can perform migrations for orders that took place in the past. The request procedure and method are described in this general faq. For BOL.com migrations, there are a number of restrictions, described in this faq. For migrations we charge €67.50 excl. VAT per 1000 orders.